Specifications
The specification has been established using the DIN test instructions.
System: | "Video 2000", 2 rotating video heads, helical scan with 186° wraparound |
Power supply: | 240V 50/60Hz (170-265V) |
Power consumption: | Approx. 50W |
Weight: | 14.5 kg |
Dimensions: | Width 525mm, height 170mm, depth 342mm |
Operating position: | Horizontal (max. inclination 20°) |
Ambient temperature: | +5° to +40°C |
Relative humidity: | Up to 80% |
TV standard: | CCIR PAL, 625 lines |
Visible picture resolution: | Approx. 3MHz |
Audio bandwidth: | 40Hz - 10kHz |
Cassette dimensions: | 183mm x 26mm x 110mm |
Rewinding time in fast forward or fast rewind mode: | VCC 120 cassette 32 sec.
VCC 240 cassette 57 sec. VCC 360 cassette 92 sec. VCC 480 cassette 128 sec. |
Rewind times for APF forward and reverse search: | VCC 120 cassette 65 sec.
VCC 240 cassette 115 sec. VCC 360 cassette 210 sec. VCC 480 cassette 260 sec. |
Tape: | 1/2 inch (12.7mm) magnetic video tape |
Tape speed: | 24.42mm/sec. ± 4% |
Head-to-tape speed: | 5.08µm/sec. |
Video track: | Width 22.55µm |
Track spacing: | 22.55µm centre to centre (no guard track) |
Sound track: | Width: 0.65mm |
Aerial input: | Coaxial socket B to DIN 45, 325, 75Ω asymmetrical for TV channels 2 - 4 (50 - 70MHz), 5 - 12 (175 - 225MHz), 21 - 68 (470 - 860MHz). Maximum input voltage 25mV (sync level), no attenuation in recorder with mains connected. |
Aerial output: | Coaxial plug S to DIN 45, 325, 75Ω |
(Modulator) | Asymmetrical, modulator on UHF channel 36, 591.25MHz ± 0.5MHz (adjustable to UHF channels 32 - 43).
Output voltage: 5mVrms for sync level into 75Ω |
Remote control socket: | 11-pin multiway socket for the following functions: record, playback, stop (= still picture), slow-motion, picture search (forward and reverse), APF forward and reverse, programme search, fast forward-rewind, channel selection (in tape position). |
Microphone socket: | Input
Pins 1+4: 0.5 - 50mVrms(1 kHz) Input impedance 47kΩ |
AV socket: | Input:
Pin 1: not connected Pin 2: Video signal 1V PP + 2 -4 dB into 75Ω Pin 3: Chassis Pins 4/6: Audio signal 100mVrms - 2Vrms (30Hz - 15kHz) Input impedance 22kΩ Pin 5: not connected |
AV socket: | Output:
Pin 1: Switching voltage + 12V/100mA (via protection diode), switched off in AV setting in record mode Pin 2: Video signal 1Vpp ± 2dB into 75Ω Pin 3: Chassis Pins 4/6: Audio signal 1V (30Hz - 15kHz) Adjustable: 0.1 - 1.9Vrms Output impedance 1kΩ. Pin 5: Supply voltage for camera etc. +12V (800mA max) via protection diode, (when recorder switched on). |
Timer | 5 events over 99 days |
Other features | Index search
Go to Picture search Slow motion Freeze picture |
Thanks to Steven Hanley for supplying this information.