Specifications
System
- Video recording system
- Rotary two-head helical scanning
- Video Signal
- CCIR standards, PAL and DDR SECAM colour
- Aerial input
- 75-ohm, asymmetrical aerial socket
- Channel coverage
- VHF: Western European channels E2-U20
- UHF: Western European channels E21-E68
- (Up to 30 programmes can be preset.)
- UHF: Western European channels E21-E68
- RF output signal
- UHF channels E30 to E39 (variable)
- 75 ohms, unbalanced
Video
- Horizontal resolution
- 260 lines
- B/W:300 lines
- Video S/N
- Colour: Better than 40dB
- B/W: Better than 43dB
Inputs and outputs
- Video input
- VIDEO IN: BNC connector
- 1.0 V (p-p)
- 75 ohms, unbalanced,
- sync negative
- 1.0 V (p-p)
- Video output
- VIDEO OUT: BNC connector
- 1.0 V (p-p)
- 75 ohms, unbalanced,
- sync negative
- 1.0 V (p-p)
Audio
- Audio inputs
- AUDIO IN: phono jack
- 47 kilohms, -10 dBs
- (0 d Bs = 0.775 V rms)
- 47 kilohms, -10 dBs
- Audio outputs
- AUDIO OUT: Phono jack
- Load impedance less than 10 kilohms
- -10 dBs with 47 kilohms load,
- unbalanced
- Load impedance less than 10 kilohms
- Audio frequency response
- 50Hz to 10,000Hz
- Signal-to-noise ratio
- 40dB
- Audio distortion
- Less than 4% at 400 Hz
Tape transport
- Tape speed
- 18.73 mm/sec.
- Maximum recording time
- 2 hours 10 min. (with Sony L-500 cassette)
- 3 hours 15 min. (with L-750)
- Fast forward/rewind time
- Within 5 min. (with L-500)
Timer
- Clock
- Crystal lock
- Time indication
- 24-hour cycle
- Timer setting Only for recording
- 1 events/3 weeks, adjustable for any day or for all 7 days of the week or for every week
- Power back-up
- 3 mins at any one time
General
- Power requirements
- 220v AC, ±10% 50/60 Hz
- Power consumption
- 38W
- Dimensions
- Approx. 430 x 80 x 382 mm (w/h/d)
- (17 x 3 1/4 x 15 1/5 inches) including projecting parts and controls
- Weight
- Approx. 8.2 kg (18 lbs 1 oz) net
Design and specifications subject to change without notice.
Note
Appliance conforms with EEC Directive 76/889 regarding interference suppression.