Home
Betamax Videos
K-Connector
Changer-Connector
Multi-Connector
|
|
This connector is only found on a couple of models (including the
SL-C9). It is used to connect the video
to a changer unit.
These pin descriptions refer to the conections at the video end of the cable. This layout given is the full specification for this connector.
1 | Switched 12v - internally fused in the video, rated at 500mA. |
2 | Record ready - when low, the unit is in timer REC READY mode. |
3 | NOT IR-2 - remote control data for controlling the remote control microprocessor. |
4 | IR / NOT EXT - select signals for the remote control microcomputer. |
5 | R-SO |
6 | Ground (12v) |
7 | NOT S-Clock |
8 | NOT S-Data |
|